Joining Multi Break Shells

Here you can ask for advice, or even just post your favorite compositions + methods!

Moderators: richardh08, Boophoenix, Lloyd

Post Reply
Paul Moulder
Posts: 64
Joined: Mon Aug 31, 2015 8:02 am
Location: Thailand
Contact:

Joining Multi Break Shells

Post by Paul Moulder »

There maybe a few people on here who build or want to build cylinder shells of more than one break. I made this video a few weeks ago showing how I join the breaks together. This was a 3 break 4 inch shell and I used 1.5 mm tarred Hemp twine to join the breaks. (anyone need the Tar Lloyd has lots)

https://www.youtube.com/watch?v=ySKfjt2YYF8
User avatar
richardh08
Site Admin
Posts: 2226
Joined: Wed Aug 07, 2013 1:54 pm
Location: Bedfordshire

Re: Joining Multi Break Shells

Post by richardh08 »

Very interesting and informative. Thanks Paul.
Even when I'm wrong, I'm convincing.
Paul Moulder
Posts: 64
Joined: Mon Aug 31, 2015 8:02 am
Location: Thailand
Contact:

Re: Joining Multi Break Shells

Post by Paul Moulder »

Another video of joining a multi break shell this one a 2 break 4 inch joined with 0.75 mm Hemp twine.

https://www.youtube.com/watch?v=ejiE1lIrG8M
Post Reply