There maybe a few people on here who build or want to build cylinder shells of more than one break. I made this video a few weeks ago showing how I join the breaks together. This was a 3 break 4 inch shell and I used 1.5 mm tarred Hemp twine to join the breaks. (anyone need the Tar Lloyd has lots)
https://www.youtube.com/watch?v=ySKfjt2YYF8
Joining Multi Break Shells
Moderators: richardh08, Boophoenix, Lloyd
-
- Posts: 64
- Joined: Mon Aug 31, 2015 8:02 am
- Location: Thailand
- Contact:
- richardh08
- Site Admin
- Posts: 2226
- Joined: Wed Aug 07, 2013 1:54 pm
- Location: Bedfordshire
Re: Joining Multi Break Shells
Very interesting and informative. Thanks Paul.
Even when I'm wrong, I'm convincing.
-
- Posts: 64
- Joined: Mon Aug 31, 2015 8:02 am
- Location: Thailand
- Contact:
Re: Joining Multi Break Shells
Another video of joining a multi break shell this one a 2 break 4 inch joined with 0.75 mm Hemp twine.
https://www.youtube.com/watch?v=ejiE1lIrG8M
https://www.youtube.com/watch?v=ejiE1lIrG8M