Keep it clean

A place where you can have some friendly discussion and leave some feedback about your experience!

Moderators: richardh08, Boophoenix, Lloyd

Post Reply
User avatar
Pyro-Gear
Site Admin
Posts: 3034
Joined: Wed Jul 10, 2013 8:24 am

Keep it clean

Post by Pyro-Gear »

A couple of people have over the last few months have contacted me saying they are experiencing jar slip on their mill, the reason for this is basically due to contamination from BP on the rollers and the jar, I know it is tempting to open the jar and admire the contents but you have just released a fine mist of BP that is air float and will be attracted to the rollers and drum and this will cause jar slip! The answer is simple load the jar leave the mill to do its work, remove the jar away from the mill and remove the contents clean the jar your ready now for your next load.
The jar and rollers are best cleaned with washing up liquid (neat) and left to dry this give a slight tack to the rollers.
So basically Keep it clean.
Post Reply