1lb screened rocket by Starseeker
This is my fast 1lb rocket fuel and method,
nozzle, 1 and three quarters tsb of bentonite clay,hand rammed with dead blow mallet about 8 to ten times.
Comp,
kno3 ,60 g (air float)
pine charc, 80 mesh 12.5 g
willow charc 80 mesh 7.5 g
willow charc ,air float 10 g
sulphur ,air float, 10 g
I screen this 3 to 4 times through a twenty mesh screen and use as it is without granulating.
I use Rich Wolters tooling,which i then polish the spindle with duraglite and then spray with furniture polish and polish off to aid spindle removal.
I then encase it all in a clamshell and press each inclement of 1.5 tsp to 1.5 tons on the gauge,the bulk head is 1.5 tsp of clay with a offset pass fire.
I use a 32 inch ,three eights of a inch thick stick.
I have found that this gives me consistent results with powerful lifting performance.
1lb screened rocket
Moderators: richardh08, Boophoenix, Lloyd
1lb screened rocket
All wretch and no vomit.......